What is the hot fix rhinestone process?
Hot-stamping technology refers to the processing technology of setting diamonds on some materials such as leather and cloth. Hot diamonds are often used on fabrics, that is, clothing or fabric accessories. The working principle is that hot diamonds meet high temperatures (because most of the diamonds are crystal or glass, they are not afraid of high temperatures). The common temperature is about 150 to 200, which melts the bottom layer of the diamond. So as to stick to the object. At present, hot fix rhinestone on clothing has become a fashion and trend. Hot stamping, as a kind of accessory, can increase the beauty of clothing and increase the value of clothing.
The hot fix rhinestone process is generally divided into three steps: diamond selection, drilling, and setting. So how do we judge the quality? It is mainly divided into three steps: first look at the appearance, look at the adhesive, look at the firmness;
1. Look at the appearance first:
First, look at the cutting surface of the hot fix rhinestone. The smoother the cutting surface, the higher its refractive index and the better the brightness. Secondly, whether the cutting surface is uniform, with cutting teeth, scratches, and bubbles are regarded as defective products. The hot-stamping process requires strict, complex process, and the rate of finished products is not very high. Diamonds with a defective rate of 3% to 5% should be regarded as good products, and then see whether the diamond size is consistent. The diameter of SS6 is 1.9 to 2.1mm, and the diameter of SS10 is 2.7 to 2.9mm... It should also look at whether the height of the hot fix rhinestone is consistent.
2. Look at the adhesive
Turn the diamond over to see if the color of the adhesive on the back is uniform, not different shades. The color is bright and uniform, which is considered a good diamond.
3. Look firm
The higher the solubility of the glue on the back of the hot diamond, the better the firmness of the diamond. The best way to identify diamonds is to wash them in a washing machine after they are ironed. They will not fall off after washing, which proves that the fastness is good. Once washed, they will be off, which proves that the glue is not strong enough, and the good products will not fall off after being cleaned.
First use wooden materials or plastic plates to make templates of various patterns, then arrange the diamonds to a fixed position on the wooden template, and then glue the arranged pictures with adhesive paper to use as diamonds.
Finally, the tools used in the hot fix rhinestone process are generally: ultrasonic hot fix rhinestone machine, ultrasonic spot rhinestone machine, ultrasonic nail rhinestone machine, heat transfer machine, etc., but the most commonly used and most common heat transfer machine should be.
