The material of the rhinestones
A diamond-like product produced by melting many chemical raw materials into a high-lead crystal glass round blank, then grinding and polishing, is currently the most common and common raw material for jewelry and other materials.
The craft of rhinestones
(1) Furnace: It must be made of all-electrode high-quality zirconium steel bricks. It can be a 0.2-ton or 0.5-ton furnace, or it can be made by other simple methods.
(2) Raw materials: Must go through strict quality screening and strict formula to melt high-quality blanks. Crystalline glass frit with at least 25% lead content, so that the refractive index is high, and the product quality is good. Therefore, the material is good, the product can be good.
(3) Blank forming: A professional machine is used to form molten glass, which must be strictly annealed to ensure its quality and mechanical properties.
(4) Machines: The machines used in the production are all professional machines, automatic equipment controlled by electronic pneumatics.
(5) All technical requirements on the machine, including the jigs and fixtures used for sticking rhinestone beads, are very strict.
(6) The rubber powder used for the grinding of rhinestone beads, namely viscose powder, is also self-made for special purposes.
(7) The emery used for grinding is also self-made, its process requirements are very strict, and it is proprietary.
(8) The polishing wheel used for polishing is to polish the formed rhinestone blanks, the purpose is to cast the rhinestone blanks to sparkle like diamonds. This wheel is made of chemical materials for special purpose.
(9) Cleaning: It is to wash the polished rhinestones so that there is no dirt.
(10) Inspection: Put the cleaned rhinestones under the lamp to check out the finished product.
(11) Screening: Separate the size of the drill, and each model must be separated.
(12) Electroless plating: plating the bottom of the diamond with a layer of silver to increase its reflectivity, that is, refraction brightness. All equipment formulations are for exclusive use.
(13) Protective film: spray the plated silver with a protective film to protect the silver layer to prevent the silver layer from turning yellow when exposed to the atmosphere. The purpose is to ensure the brightness and use time of the drill.
(14) Packaging: The purpose of packaging is the standard quality of the brand, but also to avoid scratches during inventory transportation.
(15) Inventory: classification, semicolon, and attention to air pollution.









